Overview
-
IP 67 waterproof
-
iOS and Android apps
-
4000+ Cycles
-
Advanced BMS
-
Internal heating
-
Safe & Reliable
Description
- LiFePO4 chemistry
- V2-T (52.7 cm × 21.6 cm × 30.5 cm) L × W × H
- 460 Ah capacity
- 400 A EATON Class T fuse (user-replaceable)
- 230 A at 25 °C max. continuous discharge (500 A for 30 s)
- 210 A at 25 °C max. continuous charge current
- IP67, dustproof and waterproof
- Heating — internal heating so you can charge below 0 °C
- Bluetooth — iOS and Android apps
- Victron communication with distributed charge control via DVCC
- Up to 16 batteries in parallel on one system
- External on/off button and battery gauge included
- Built-in smart Battery Management System (BMS)
- Protection against overcharge and deep discharge
- Protection against overcurrent and short circuit
- Disconnection at high and low temperature
- Internal fuse certified to UL60691
- Cells certified to UL1642, UL9540A, IEC 62619:2022
- Pack certified to UL1973
- 4000+ cycles and maintenance-free
- 11-year factory warranty
Specifications
Configuration
- Cell configuration
- 4S2P
- Chemistry
- LiFePO4
Current
- Ah capacity
- 460 Ah
- Max continuous discharge
- 230 A @ 25 °C
- Max charge current
- 210 A @ 25 °C
- Peak discharge current
- 500 A (30 seconds), 1300 A (1 second)
- Series / parallel
- Max (4) in series or max (16) in parallel — 4S1P or 1S16P
Voltage
- Voltage
- 12.8 V
- Max charge voltage
- 14.6 V
- Operating voltage range
- 10.0–14.6 V
Temperature
- Charge temp range
- −30 °C (−22 °F) / 55 °C (131 °F) (with self-heating)
- Discharge temp range
- −20 °C (−4 °F) / 55 °C (131 °F)
- Storage temp
- 0 °C (32 °F) / 35 °C (95 °F)
General
- Application
- Camper, boat, off-grid
- Nominal energy
- 5.89 kWh (460 Ah × 12.8 V)
- Warranty
- 11-year manufacturer warranty
Weights & Dimensions
- Weight
- 44 kg (97 lbs)
Dimensions
- Length
- 52.7 cm (20.75 in)
- Width
- 21.6 cm (8.5 in)
- Height
- 30.5 cm (12 in)
Recommended Charging Settings
Batteries used outside Victron systems work best with the following settings:
- Absorption voltage: 14.2 V
- Absorption time: 15 minutes per battery
- Float voltage: 13.5 V
- Equalization: off
- No temperature compensation (disabled)
V2-T Elite with Victron systems
Connect the communication harness and indicator as follows:
- Plug with waterproof cap in the blue port of the master.
- RJ45 cable from the master black port to the slave1 blue port.
- RJ45 cable from the slave1 black port to the next slave’s blue port, and so on, to connect up to 16 batteries in parallel.
- Set the dip switches according to the manual.
- Grey RJ45 into the BMS-CAN port of the Cerbo or Ekrano GX; on the new Cerbo Mk2 use the grey connector in VE-CAN1 or VE-CAN2 and set the VE.Can port speed to 500 kbit/s LV.
GX device / touchscreen
- On the GX touchscreen, check that the Epoch battery appears in the device list. Click the battery row, then Details. Verify that the number of online modules matches the number of batteries installed and that the stated Ah matches the installed Ah.
- On the GX device/touchscreen, enable DVCC, set controlling BMS to Epoch and the battery monitor to Epoch.
- When charging (not when inverting), the inverter tile on the GX touchscreen should show External Control. The system automatically switches to 14.2 V absorption with at least about 15 minutes absorption time per battery, followed by 13.5 V float.
- We recommend manually setting the MultiPlus, Quattro and all other charge sources to the same parameters in case CAN communication is lost.
Extra information
Certifications: UL1973, RoHS, CE
Experience the difference
See inside
Find out what really sets these batteries apart. In these in-depth videos they are fully tested, measured, taken apart and even submerged in water for two days and then tested again. So you can see exactly what you are buying.